Keller Pool Builder

Plano's climate offers a usable outdoor season that stretches from March through November with intentional design — and genuine year-round use when heating systems are properly sized. The key is designing for North Texas temperature swings rather than a single season.

Custom spas with dedicated heaters are the foundation of year-round use. A properly insulated spa with a gas heater reaches comfortable temperatures in under 30 minutes even in January, making evening use practical through winter. Our Plano projects often position the spa with sight lines toward fire features — raised fire bowls or a fireplace — creating a warm gathering zone independent of air temperature.

Material selection matters in Plano's freeze-thaw cycle. We specify travertine and natural stone with proper drainage slopes to prevent ice accumulation on walking surfaces. Pebble plaster finishes like the Blue Surf Peerless outperform standard marcite in thermal cycling, resisting the micro-cracking that North Texas winters inflict on lesser finishes.

Covered structures extend the season further. A well-oriented pergola blocks summer sun during peak hours while allowing low winter sun to warm the space naturally. Add automated LED lighting and you create an outdoor environment that functions after dark from October through April — the months when Plano's outdoor living spaces are most comfortable.

Plano requires a residential pool permit through the city's Building Inspections division before construction begins. The permit process covers structural engineering, electrical for pumps and lighting, plumbing connections, gas lines for heaters or fire features, and a barrier inspection to meet the International Swimming Pool and Spa Code. Typical permit turnaround in Plano runs two to three weeks, though complex projects with retaining walls or structures near setback lines may require additional review.

Beyond city permitting, many of Plano's established neighborhoods operate under homeowner associations with their own architectural review requirements. Communities in the Willow Bend corridor, Chase Oaks, Deerfield, and Kings Ridge typically require submission of landscape plans, material samples, and elevation drawings before approving pool construction. Approval timelines vary — some HOAs meet monthly, others quarterly — so we recommend initiating the architectural review process during the design phase rather than waiting for construction-ready plans.

One consideration specific to Plano: because the city's residential development spans from the 1970s through today, lot sizes and setback requirements differ significantly between older and newer sections. Homes along the Plano ISD corridor in west Plano may have different rear setback constraints than newer Collin County parcels near the Frisco border. We verify these during our initial site assessment before design begins.

Frisco's residential growth spans the Collin–Denton county line, where communities like Phillips Creek Ranch, Richwoods, and Newman Village feature lots that routinely exceed a quarter acre. That space changes the design conversation — instead of fitting a pool into a tight footprint, we design the entire outdoor environment as an integrated extension of the home.

Our design process in Frisco starts with a site assessment specific to each lot's drainage patterns, grade changes, and the relationship between indoor living areas and the proposed outdoor space. Newer Frisco homes often feature expansive rear elevations with covered patios that become the visual anchor for pool placement and orientation.

Larger lots allow features that constrained properties cannot accommodate — vanishing-edge pools oriented toward open sight lines, freeform designs with rock grottos and waterfall features, or geometric pools with separate spa structures connected by raised-beam spillways. Our Frisco projects average pool perimeters exceeding 80 feet with water volumes above 13,000 gallons.

Many Frisco communities maintain architectural review committees that influence material selections beyond basic city permitting. Travertine decking, natural stone veneer, and glass tile accents are frequently specified — both for aesthetic consistency with surrounding homes and for long-term performance against the Blackland Prairie clay movement that affects this part of Collin County.

Frisco homeowners consistently invest in complete outdoor environments that extend well beyond the pool itself. Our Frisco projects typically integrate multiple living zones — a pattern driven by the city's generous lot sizes and newer construction with large-format windows that frame the outdoor space from inside.

The most requested features in our Frisco builds include built-in outdoor kitchens with commercial-grade grills, refrigeration, and ice chests positioned under cedar pergola structures engineered for North Texas wind loads. Fire features are nearly universal — raised fire bowls flanking a custom spa, or a standalone fireplace anchoring a covered seating area.

Water features add dimension after dark: sheer descent waterfalls, spillway spas, deck jets, and bubblers with integrated LED color lighting. Tanning ledges — shallow in-pool wading shelves — have become a standard request, creating a transition zone between the pool and adjacent entertaining spaces.

Smart automation ties everything together. Systems like the Jandy AquaLink RS let you control pool temperature, spa jets, lighting, fire features, and water elements from your phone — essential when you're entertaining and can't step away to the equipment pad. Combined with saltwater sanitation and UV treatment, the complete outdoor environment operates with minimal daily effort.

Our Frisco new construction projects typically range from $140,000 to $245,000 depending on scope and material selections.

Selah Pools builds throughout the southern DFW corridor — Midlothian, Waxahachie, Mansfield, Cedar Hill, Red Oak, and Burleson. This corridor shares the same soil conditions, overlapping permitting frameworks, and a common trajectory of residential growth along the I-35E corridor. We’ve designed and built projects across Ellis and Tarrant counties that navigate the same expansive clay, the same design expectations, and the same commitment to craftsmanship. Whether you’re on an established lot near central Midlothian, in newer development along the highway corridor, or on acreage between Midlothian and Waxahachie, we bring the same design-build process to every project.

A typical custom gunite pool in Midlothian takes twelve to sixteen weeks from excavation to final plaster. Complete outdoor environments that include custom spa, covered patio, fire features, outdoor kitchen, and architectural landscaping may extend to eighteen or twenty weeks depending on scope. For new construction coordination, early engagement is critical — starting the pool design while your home is in framing allows concurrent scheduling that compresses the overall move-in-to-swimming timeline significantly. Selah provides a detailed construction schedule before work begins, with milestone communication throughout. North Texas weather, particularly spring rain and summer heat, is the primary schedule variable. We build buffer into every timeline rather than promise aggressive dates we can’t deliver.

Midlothian properties offer the kind of space that enables thoughtful pool and outdoor living design. We’ve built pools with sheer descents and natural stone coping, custom spas with dedicated jet systems, covered patios with built-in outdoor kitchens, and complete environments framed by cedar structures and architectural landscaping. Geometric pools with clean lines suit contemporary homes; naturalistic compositions with organic curves and stone features integrate with properties that have landscape character. The design always starts with your lot, your home’s architecture, and how your family plans to use the space. We don’t work from templates — each project is custom, responding to the specific conditions and vision that make your property yours.

Selah builds for both — and the design approach adapts to each situation. New construction coordination means starting the pool design conversation while your home is still in framing, allowing concurrent scheduling and integrated site planning that treats the outdoor environment as part of the original architecture. For existing homes, we design around established landscapes, drainage patterns, utilities, and the home’s mature character. Midlothian’s mix of established neighborhoods and newer development means we regularly navigate both scenarios. Whether we’re coordinating with a home builder on a new lot or transforming the outdoor living space of a property you’ve lived in for years, we bring the same design-build discipline and structural engineering rigor to every project.

Midlothian sits on the same Blackland Prairie formation that defines the Ellis County landscape — expansive clay soils that shrink during drought and swell after heavy rain, creating seasonal ground movement that is the most important factor in pool engineering across the southern DFW corridor. Selah specifies gunite shell construction with engineered steel reinforcement calibrated specifically for expansive clay conditions. Our structural engineering addresses soil bearing capacity, hydrostatic pressure, and the seasonal movement cycles that north Texas clay produces year after year. We’ve built on this geology across Ellis and Tarrant counties — in Midlothian, Waxahachie, Mansfield, and Red Oak — and we design for the soil rather than react to it. On recently graded lots or properties where drainage patterns direct water toward the build site, we also design drainage systems that protect the pool structure during its most vulnerable early years.

The City of Midlothian manages residential pool permits through its Development Services department. As a growing Ellis County community, Midlothian has invested in a permitting process that accommodates both new construction and renovation projects across its expanding residential base. The process requires structural engineering plans, site surveys demonstrating setback compliance, fencing plans meeting Texas barrier code, and electrical permits for equipment and lighting. Selah handles every element as part of our scope — you don’t coordinate with the city separately. Permit turnaround in Midlothian typically runs two to four weeks for standard residential projects. If you’re coordinating pool construction with a home builder or alongside other property improvements, we align our permit timeline with the broader construction schedule to minimize delays.